{"id":334,"date":"2025-11-18T05:20:37","date_gmt":"2025-11-18T05:20:37","guid":{"rendered":"https:\/\/rock-crusher-tractor.com\/?post_type=product&p=334"},"modified":"2026-05-21T07:42:33","modified_gmt":"2026-05-21T07:42:33","slug":"ct-2100-rock-picker-110-hp-professional-stone-collector-with-2-5-m%c2%b3-bunker-korea-stock","status":"publish","type":"product","link":"https:\/\/rock-crusher-tractor.com\/pt\/produto\/ct-2100-rock-picker-110-hp-professional-stone-collector-with-2-5-m%c2%b3-bunker-korea-stock\/","title":{"rendered":"Coletor de pedras CT-2100 \u2013 Coletor de pedras profissional de 110 HP com reservat\u00f3rio de 2,5 m\u00b3 (Estoque na Coreia)"},"content":{"rendered":"
\n
\n
\n
110 HP<\/div>\n
Pot\u00eancia m\u00ednima<\/div>\n<\/div>\n
\n
2,5 m\u00b3<\/div>\n
Bunker Capacity<\/div>\n<\/div>\n
\n
80 Kg<\/div>\n
Max Stone Weight<\/div>\n<\/div>\n
\n
1,95 m<\/div>\n
Largura de trabalho<\/div>\n<\/div>\n
\n
3\u20135 km\/h<\/div>\n
Velocidade de trabalho<\/div>\n<\/div>\n<\/div>\n

<\/p>\n

Picks Up Stones and Removes Them \u2014 Nothing Left Behind<\/h2>\n

The CT-2100 is a tractor-mounted rock picker that physically lifts surface stones from the field and deposits them into a 2.5 m\u00b3 hydraulic-tip bunker. When the bunker is full, it tips hydraulically to discharge directly into a waiting truck \u2014 no manual handling required. The machine collects stones from approximately 5 cm diameter up to 80 kg in weight, at a working speed of 3\u20135 km\/h across a 1.95 m picking width. Full-width rubber shielding prevents stone projection in any direction \u2014 safe to operate near roads, irrigation infrastructure, and planted crop rows.<\/p>\n

Unlike a stone crusher, the CT-2100 does not leave anything behind. The stones collected are physically removed from the field, transported away, and the field surface is left completely clear of the stone fraction above 5 cm. This complete removal is what ginseng growers, potato farms, and vegetable producers require when crushed aggregate remaining on the field surface would cause crop damage or harvester contact injury.<\/p>\n

The CT-2100 works most effectively as the second step after stone crushing. A Triturador de pedra THOR 2.4<\/a> or THOR 3.0 pass first reduces all embedded stones \u2014 including those above the CT-2100’s 80 kg picking limit \u2014 into fragments the picker can then collect. On fields with only light surface stone below the 80 kg limit, the CT-2100 can operate as the first and only machine. On fields with the Ancinho de rocha EP-EW-4000<\/a> used first to windrow surface stones, the CT-2100 collects from those windrows more efficiently than from a randomly distributed stone surface.<\/p>\n

\"CT-2100<\/p>\n

<\/p>\n

\n
\"EP-EW-4000<\/div>\n
\n

EP-EW-4000 Ancinho de Pedra<\/p>\n

75 HP \u00b7 3.6 m Width \u00b7 Cat. 2 Hitch \u00b7 540 RPM PTO<\/p>\n

The EP-EW-4000 gathers surface stones into windrows at 75 HP \u2014 the same tractor power as the CT-2100. On lighter stone fields where crushing is not required, this rake-then-pick sequence is the efficient approach: EW-4000 concentrates stones into windrows, CT-2100 collects from those windrows efficiently.<\/p>\n<\/div>\n<\/div>\n

<\/p>\n

\n

Technical Specifications \u2014 CT-2100<\/h2>\n
\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
DADOS T\u00c9CNICOS<\/th>\nCT-2100<\/th>\n<\/tr>\n<\/thead>\n
Comprimento (mm)<\/td>\n6,000<\/td>\n<\/tr>\n
Largura (mm)<\/td>\n3,050<\/td>\n<\/tr>\n
Altura (mm)<\/td>\n2,340<\/td>\n<\/tr>\n
Peso<\/strong><\/td>\n3,400 Kg<\/strong><\/td>\n<\/tr>\n
Categoria de v\u00ednculo<\/td>\nCat. 2<\/td>\n<\/tr>\n
Largura \u00fatil<\/strong><\/td>\n1,95 m<\/strong><\/td>\n<\/tr>\n
Capacidade do bunker<\/strong><\/td>\n2,5 m\u00b3<\/strong><\/td>\n<\/tr>\n
Peso m\u00e1ximo da pedra<\/strong><\/td>\n80 Kg<\/strong><\/td>\n<\/tr>\n
Pot\u00eancia m\u00ednima do trator<\/strong><\/td>\n110 HP<\/strong><\/td>\n<\/tr>\n
Min. hydraulic flow<\/td>\n60 L\/min<\/td>\n<\/tr>\n
Velocidade de trabalho<\/strong><\/td>\n3\u20135 km\/h<\/strong><\/td>\n<\/tr>\n
V\u00e1lvulas de controle necess\u00e1rias<\/strong><\/td>\n2<\/strong><\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

\u24d8 All specifications from the Watanabe official product brochure. 2 hydraulic control valves required (bunker tip + picking head motor). Minimum 60 L\/min hydraulic flow \u2014 verify if your tractor is below 120 HP. HP = horsepower.<\/p>\n<\/div>\n

<\/p>\n

\n

Key Features<\/h2>\n
\n
\n

\u25a0 2.5 m\u00b3 Hydraulic-Tip Bunker<\/p>\n

Tips hydraulically to discharge collected stones directly into a truck, stone pile, or field margin. The bunker geometry allows discharge over a standard truck sidewall without requiring the tractor to reposition alongside. No manual stone handling at any point \u2014 the tractor operator completes the full collection and discharge cycle from the cab.<\/p>\n<\/div>\n

\n

\u25a0 Hydraulic Swinging Drawbar<\/p>\n

Adjusts weight distribution for slope operation up to 25%. Maintains consistent picking-tine ground contact across the full 1.95 m working width on uneven or cross-slope terrain \u2014 important for the terraced and sloped fields common in Korean highland agricultural zones.<\/p>\n<\/div>\n

\n

\u25a0 Carbide-Tipped Picking Tines<\/p>\n

Picking tines with carbide tips for extended service life in abrasive Korean granite and Jeju basalt conditions. Individually replaceable. Inspect tines at regular intervals; carbide-tipped tines maintain their picking geometry significantly longer than standard steel tines in demanding soil conditions.<\/p>\n<\/div>\n

\n

\u25a0 Full-Width Rubber Shield \u2014 Zero Stone Throw<\/p>\n

Prevents stone projection across the full 1.95 m working width. Safe to operate near public roads, greenhouse structures, installed drip irrigation, and planted crop rows where stone projection would cause injury or damage. Required for any operation in shared working environments.<\/p>\n<\/div>\n

\n

\u25a0 High-Capacity Hydraulic Motor<\/p>\n

Maintains full picking-tine speed in wet clay and heavy spring soil conditions common in Korean agriculture. The 60 L\/min minimum hydraulic flow specification ensures the picking head operates at rated speed even in demanding conditions. Verify hydraulic flow output on tractors below 120 HP before ordering.<\/p>\n<\/div>\n<\/div>\n<\/div>\n

<\/p>\n

\n

Aplica\u00e7\u00f5es na Coreia<\/h2>\n

\"CT-2100<\/p>\n

Ginseng Field Preparation \u2014 Complete Stone Removal Required<\/h3>\n

Ginseng production in South Chungcheong (Geumsan-gun, Yesan-gun) requires complete stone removal to below 2 cm for the 6-year rotation. Any residual stone above this size causes root deformity at harvest and grade loss. The professional sequence: THOR 2.4 crushes large embedded stones \u2192 CT-2100 picks up all crushed fragments. The two-machine sequence is standard practice among commercial ginseng operations in Korea’s ginseng belt because neither machine alone achieves the required result.<\/p>\n

New Orchard Stone Clearance<\/h3>\n

For apple, pear, citrus, and persimmon orchard establishment \u2014 from initial sapling planting through to irrigation system installation \u2014 the field must be completely stone-free. The CT-2100’s 2.5 m\u00b3 bunker loads approximately 4\u20135 tonnes of collected stone per fill before hydraulic discharge into the waiting truck. On a typical Korean highland orchard site, one full bunker covers 0.8\u20131.2 hectares of moderate stone density field before discharge is needed.<\/p>\n

Potato and Vegetable Seedbed Preparation<\/h3>\n

Mechanical potato harvesters and vegetable harvesters are damaged by stones in the harvesting zone. For potato production in Gangwon-do (Pyeongchang-gun, Hoengseong-gun), the standard pre-planting sequence is: THOR stone crusher \u2192 CT-2100 rock picker \u2192 Rotavador PSW-3200<\/a> for seedbed tillage. The CT-2100 provides the complete stone removal between the crushing and tillage steps.<\/p>\n

\"CT-2100<\/p>\n

<\/p>\n

\n
\"PSW-3200<\/div>\n
\n

Rotavador PSW-3200<\/p>\n

140 HP \u00b7 3.0\u20133.6 m Adjustable \u00b7 540\/1000 RPM \u00b7 Cat. 2 Hitch<\/p>\n

After the THOR stone crusher and CT-2100 rock picker clear the field, the PSW-3200 rotavator performs primary tillage \u2014 creating the fine, aerated seedbed depth required before potato furrowing, planting, and subsequent crop production operations.<\/p>\n<\/div>\n<\/div>\n

Jeju Island Annual Stone Clearance<\/h3>\n

Jeju’s basalt-derived soils produce annual surface stone accumulation through frost-heave. Annual CT-2100 stone clearance is standard practice on Jeju citrus and greenhouse vegetable farms. The carbide-tipped picking tines handle Jeju basalt abrasion with higher service life than standard steel tines \u2014 inspect at more frequent intervals than mainland field use due to the higher abrasiveness of Jeju volcanic rock.<\/p>\n<\/div>\n

<\/p>\n

\n

The Complete Stone Clearance System \u2014 Crusher + Picker in Sequence<\/h2>\n

The CT-2100 rock picker is most commonly used as the second step in a two-machine stone clearance sequence. Understanding why the crusher-then-picker order is necessary \u2014 rather than the picker alone \u2014 explains the professional standard that Korean highland operators have adopted for ginseng, potato, and orchard preparation.<\/p>\n

Why the Crusher Must Come First<\/h3>\n

The CT-2100 has a maximum stone weight limit of 80 Kg per individual stone. On Korean highland granite and Jeju basalt fields, embedded stones above this weight are common \u2014 in heavily stoned ginseng preparation zones in Geumsan-gun and on mountain orchard terraces across North Gyeongsang, individual stones regularly exceed 100\u2013200 Kg. If the CT-2100 attempts to lift a stone above its 80 Kg design limit, the picking tines deflect, the stone is not lifted, and in the worst case the tine is bent or broken. A THOR stone crusher pass first reduces all embedded stones \u2014 including those far above the picker’s weight limit \u2014 into fragments below 80 Kg that the CT-2100 can then collect cleanly.<\/p>\n

Why the Picker Must Come Second<\/h3>\n

After a THOR crushing pass, the field surface is covered in crushed aggregate \u2014 stone fragments of varied sizes from fine gravel to pieces up to approximately 10 cm. For road construction and general land clearing, this aggregate remaining on the field surface is acceptable or beneficial. For ginseng, potato, and vegetable seedbeds, any residual stone above approximately 2\u20135 cm causes problems: root deformity in ginseng during the 6-year tuber development, harvester blade contact and crop bruising in potato harvest, and irrigation line puncture in orchard drip systems. The CT-2100 picks up everything above approximately 5 cm and removes it completely from the field \u2014 the post-crusher surface that was unacceptable for planting becomes completely clean after the picker pass.<\/p>\n

The Combined Three-Step Sequence<\/h3>\n
\n
\n
PASSO 1<\/div>\n

THOR 2.4 or THOR 3.0 Rock Crusher<\/strong> \u2014 Reduces all stones including those above 80 Kg to collectable fragment size. Mulches vegetation simultaneously. Duration: approximately same ha\/h as the CT-2100 picking pass.<\/p>\n<\/div>\n

\n
PASSO 2<\/div>\n

CT-2100 Rock Picker (this machine)<\/strong> \u2014 Collects all fragments from 5 cm to 80 Kg into the 2.5 m\u00b3 bunker. Hydraulic tip to truck discharge. Zero residual stone above 5 cm after this pass.<\/p>\n<\/div>\n

\n
PASSO 3<\/div>\n

PSW-3200 Rotavator or equivalent<\/strong> \u2014 Primary tillage incorporates remaining organic material and produces crop-ready seedbed depth and fineness. Field is now ready for furrowing, fertilizing, and planting.<\/p>\n<\/div>\n<\/div>\n

Korean commercial standard:<\/strong> This three-step sequence \u2014 crusher, picker, rotavator \u2014 has become the professional preparation protocol for Korean highland potato, ginseng, and high-value vegetable production because it consistently produces results that neither a crusher alone nor a picker alone can achieve.<\/p>\n<\/div>\n

<\/p>\n

\n

Watanabe \u2014 Mais de 50 anos de fabrica\u00e7\u00e3o de m\u00e1quinas agr\u00edcolas<\/h2>\n
\n
\"Certifica\u00e7\u00f5es<\/div>\n
\"Watanabe<\/div>\n<\/div>\n

Watanabe Ind\u00fastria e Com\u00e9rcio de M\u00e1quinas Ltda., founded in Castro, Paran\u00e1, Brazil in 1970, manufactures the complete Watanabe agricultural implement range \u2014 including the CT-2100 rock picker \u2014 from a single dedicated production facility in Paran\u00e1 state. Over 50 years of continuous production in the Brazilian agricultural machinery sector, where rock-heavy soils, steep terrain, and demanding seasonal operating schedules are standard, has produced the engineering experience and manufacturing process knowledge that the CT-2100 design reflects.<\/p>\n

CT-2100 Design and Manufacturing Quality<\/h3>\n

The CT-2100 picking head assembly \u2014 the mechanical interface between the machine and the soil \u2014 is manufactured from high-strength steel with carbide-tipped picking tines designed for extended service in abrasive soil conditions. The hydraulic bunker system: cylinder, pivot, and tip mechanism are assembled and functionally tested at the factory. The oversized hydraulic motor specification is a deliberate design choice over the minimum-specification alternatives \u2014 it maintains full picking-head speed under the elevated hydraulic load of wet clay and heavy soil conditions where a minimum-spec motor would lose speed and reduce field output. The 3,400 Kg machine weight reflects the structural specification needed to maintain picking-head ground contact at 3\u20135 km\/h forward speed across the terrain variations typical of Korean highland agricultural fields.<\/p>\n

Why the CT-2100 Suits Korean Agricultural Conditions<\/h3>\n

Korean agricultural soils present several picking challenges: spring clay soils in South Chungcheong and South Jeolla are wet and cohesive during the key stone clearance window; Gangwon-do highland soils combine granite fragments with fine sediment that can bridge the tine spacing if the picking head slows below rated speed; Jeju Island basalt fragments are angular and abrasive, accelerating tine tip wear in machines not specified for abrasive conditions. The CT-2100’s carbide-tipped tine specification, oversized hydraulic motor, and adjustable swinging drawbar for slope terrain were all developed to address exactly these soil-machine interaction conditions.<\/p>\n

Korea Local Stock and After-Sales Support<\/h3>\n

Korea Watanabe stocks the CT-2100 and replacement carbide-tipped tine sets locally in Ansan-si, Gyeonggi-do. Local tine stock is particularly important for Korean operations because the primary tine replacement demand peaks in spring (before the stone clearance season) and in autumn (after the season, during machine storage preparation). Ordering tines in advance of the season is strongly recommended \u2014 replacement tines for the CT-2100 are available for next-day domestic dispatch.<\/p>\n

Korean-language technical support covers product commissioning, tine inspection scheduling, hydraulic system checks, and wear part ordering throughout the machine’s service life. Warranty terms covering mechanical defects in the drive system, bunker hydraulic assembly, and main frame structure are confirmed at purchase.<\/p>\n<\/div>\n

<\/p>\n

\n

Perguntas frequentes<\/h2>\n
\n
\n

Should I use the CT-2100 on its own or after a stone crusher?<\/p>\n

The CT-2100 has a maximum stone weight of 80 kg. Stones heavier than this \u2014 common in Korean highland granite and basalt fields \u2014 cannot be picked up safely and will stop the tines or damage the picking mechanism if attempted. Pre-crushing with the THOR 2.4 or THOR 3.0 is the correct first step on heavy-stone fields, reducing all stones to collectable fragment size before the CT-2100 pass. On fields with uniformly light stone density where individual stones are below 80 kg, the CT-2100 can be the only machine needed. Send us a description or photo of your field stone conditions and we will confirm the right sequence.<\/p>\n<\/div>\n

\n

What size stones does the CT-2100 collect?<\/p>\n

The CT-2100 picks stones from approximately 5 cm diameter (the minimum size the tine spacing collects reliably) up to the 80 kg weight limit. Stones below 3\u20135 cm pass through the tine gaps and remain in the soil \u2014 which is generally acceptable for most Korean agricultural applications since very small stone fragments do not typically cause harvester damage or crop quality issues at this size.<\/p>\n<\/div>\n

\n

What tractor do I need?<\/p>\n

110 HP minimum, Category 2 three-point hitch, 2 hydraulic remote valve outlets, and at least 60 L\/min hydraulic flow. Most Korean farm tractors above 110 HP \u2014 Daedong (\ub300\ub3d9), LS, TYM, John Deere, New Holland \u2014 meet these requirements. Tractors between 110\u2013120 HP should have their hydraulic flow output verified, as some compact tractor hydraulic systems may deliver below the 60 L\/min minimum under combined load. We confirm compatibility for your specific tractor model before delivery.<\/p>\n<\/div>\n

\n

How many truck loads of stone does the CT-2100 collect per day?<\/p>\n

A 2.5 m\u00b3 bunker filled with stone typically weighs approximately 4\u20135 tonnes depending on stone density (basalt is heavier than granite). Bunker fill time varies with stone density on the field \u2014 a heavily stoned field after a THOR crushing pass may fill the bunker in 45\u201360 minutes; a lighter field may take longer. Plan your truck rotation and disposal site logistics before the picking operation to avoid waiting with a full bunker during the productive working day.<\/p>\n<\/div>\n

\n

Can the CT-2100 work on slopes?<\/p>\n

The hydraulic swinging drawbar provides weight distribution adjustment for slopes up to 25%. For slopes above 25%, operate with the bunker at partial fill to keep the combined machine-and-load weight distribution manageable on the tractor’s rear axle. Discharge the bunker more frequently on steep sections rather than waiting for a completely full load. The hydraulic drawbar adjustment compensates for cross-slope terrain \u2014 useful on terraced Korean highland fields where the machine operates across the slope rather than up-and-down it.<\/p>\n<\/div>\n

\n

How does the CT-2100 differ from using an EP-EW-4000 rock rake?<\/p>\n

The EP-EW-4000 rock rake sweeps stones into windrows but does not collect them \u2014 it organizes them for subsequent pickup or crushing. The CT-2100 physically picks stones and loads them into a bunker for removal. The rock rake alone cannot remove stones from the field; it is a concentration and preparation step. The CT-2100 alone cannot handle stones above 80 kg. Combined workflow: rock rake (windrows lighter stones) \u2192 CT-2100 picks from windrows. Or: THOR crusher (reduces large stones) \u2192 CT-2100 collects fragments. The appropriate combination depends on your stone size and density.<\/p>\n<\/div>\n

\n

What maintenance does the CT-2100 need after the picking season?<\/p>\n

After each season: clean all soil and stone debris from the tine assembly and bunker interior; inspect every tine for wear, bending, or cracking \u2014 replace damaged tines before storage; check all hydraulic hoses for leaks; verify the bunker hydraulic cylinder operates through full extension and retraction; inspect the full-width rubber shield for tears and replace any damaged sections before the next season. Order replacement tines in autumn for delivery before the spring clearing season \u2014 tine stock is maintained in Ansan-si for next-day domestic supply.<\/p>\n<\/div>\n<\/div>\n<\/div>\n

<\/p>\n

\n

Avalia\u00e7\u00f5es de clientes<\/h2>\n
\n
\n

Jang Hyeon-su \u2014 Ginseng Farm, Geumsan-gun, South Chungcheong (2024)<\/p>\n

\u2605\u2605\u2605\u2605\u2605<\/p>\n

“6-year ginseng rotation requires the cleanest seedbed available. First season with the CT-2100 after a THOR 2.4 crushing pass: prepared 8 hectares of new ginseng plots in 6 working days to a standard that manual labor couldn’t achieve. Grade rejection due to stone contact dropped approximately 70% in the first harvest cycle from those plots.”<\/p>\n<\/div>\n

\n

Bae Seong-jun \u2014 Apple Orchard, Cheongdo-gun, Gyeongsangbuk-do (2024\u20132025)<\/p>\n

\u2605\u2605\u2605\u2605\u2605<\/p>\n

“New orchard on 12 hectares of former scrubland. THOR 2.4 first, CT-2100 second. The CT-2100 collected approximately 85 tonnes from the 12 hectares over 3 working days \u2014 bunker discharge directly into a 5-tonne truck alongside. Zero residual stone after the combined passes. The drip irrigation installation team were complimentary about the site condition.”<\/p>\n<\/div>\n

\n

Song Hee-jun \u2014 Citrus Farm, Seogwipo, Jeju Island (2024)<\/p>\n

\u2605\u2605\u2605\u2605\u2605<\/p>\n

“Annual Jeju basalt clearance is standard farm management here. The CT-2100 annual pass on our 18-hectare citrus block takes 4\u20135 days and picks up stones the old excavator bucket approach missed completely. Carbide tine wear in Jeju basalt is higher than mainland rock \u2014 I shorten the inspection interval accordingly. Korea team had tine sets available for next-day delivery when needed.”<\/p>\n<\/div>\n

\n

Roh Tae-yeong \u2014 Carrot Farm, Buan-gun, Jeollabuk-do (spring 2025)<\/p>\n

\u2605\u2605\u2605\u2605\u2605<\/p>\n

“Carrots require zero stones for mechanical harvesting \u2014 any stone above 3\u20134 cm in the harvesting zone causes direct crop damage. Annual spring stone clearance across 22 hectares. THOR 2.4 on the heavier sections, CT-2100 full area. After two seasons, harvester maintenance costs are noticeably lower \u2014 direct result of cleaner seedbeds. The rubber stone guard matters for us because one field boundary is adjacent to a road.”<\/p>\n<\/div>\n

\n

Im Jae-seon \u2014 Stone Clearance Service Contractor, Naju, South Jeolla (2025)<\/p>\n

\u2605\u2605\u2605\u2605\u2605<\/p>\n

“Running the CT-2100 as part of a contract stone clearance service across South Jeolla \u2014 garlic, onion, and cabbage farms in Naju and Haenam. I offer the THOR 2.4 crush + CT-2100 pick as a packaged service. Two seasons, reliable operation through the spring clearing window, no unexpected downtime. Good local support when I had a hydraulic question after the first season.”<\/p>\n<\/div>\n

\n

Ahn Byeong-tae \u2014 Golf Course Landscaping Contractor, Gyeonggi-do (2024)<\/p>\n

\u2605\u2605\u2605\u2605\u2605<\/p>\n

“Golf course rough area preparation \u2014 complete surface stone removal before turf laying. The CT-2100’s full-width rubber shield is safe to operate in confined landscaping site conditions where other contractors and vehicles are nearby. Cleared 6 hectares of rough area in 3 working days. The 2.5 m\u00b3 bunker capacity means fewer truck movements compared to smaller capacity pickers.”<\/p>\n<\/div>\n<\/div>\n<\/div>\n

<\/p>\n

\n

Tell Us Your Crop and Stone Type \u2014 We Confirm the Right Machine<\/p>\n

Field area + stone density + crop type + tractor HP \u2192 specific recommendation in one business day. CT-2100 and all Watanabe implements in stock at trator-de-pedras.com<\/a>, Ansan-si, Gyeonggi-do.<\/p>\n

Entre em contato conosco agora mesmo.<\/a><\/p>\n<\/div>\n<\/div>","protected":false},"excerpt":{"rendered":"

 <\/p>\n

\n

Tractor-mounted rock picker that collects and removes surface stones completely. 2.5 m\u00b3 hydraulic-tip bunker<\/strong> discharges directly into a truck. Picks stones up to 80 Kg<\/strong> at 3\u20135 km\/h. Zero stone throw \u2014 safe near roads, greenhouses, and planted rows.<\/p>\n

110 HP \u00b7 1.95 m width \u00b7 Cat. 2 hitch \u00b7 60 L\/min hydraulic flow \u00b7 Korea Ansan-si stock.<\/p>\n<\/div>","protected":false},"featured_media":336,"comment_status":"open","ping_status":"closed","template":"","meta":{"_et_pb_use_builder":"","_et_pb_old_content":"","_et_gb_content_width":""},"product_brand":[],"product_cat":[23],"product_tag":[],"class_list":["post-334","product","type-product","status-publish","has-post-thumbnail","product_cat-rock-pickers","first","instock","shipping-taxable","product-type-simple"],"_links":{"self":[{"href":"https:\/\/rock-crusher-tractor.com\/pt\/wp-json\/wp\/v2\/product\/334","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/rock-crusher-tractor.com\/pt\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/rock-crusher-tractor.com\/pt\/wp-json\/wp\/v2\/types\/product"}],"replies":[{"embeddable":true,"href":"https:\/\/rock-crusher-tractor.com\/pt\/wp-json\/wp\/v2\/comments?post=334"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/rock-crusher-tractor.com\/pt\/wp-json\/wp\/v2\/media\/336"}],"wp:attachment":[{"href":"https:\/\/rock-crusher-tractor.com\/pt\/wp-json\/wp\/v2\/media?parent=334"}],"wp:term":[{"taxonomy":"product_brand","embeddable":true,"href":"https:\/\/rock-crusher-tractor.com\/pt\/wp-json\/wp\/v2\/product_brand?post=334"},{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/rock-crusher-tractor.com\/pt\/wp-json\/wp\/v2\/product_cat?post=334"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/rock-crusher-tractor.com\/pt\/wp-json\/wp\/v2\/product_tag?post=334"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}