{"id":1110,"date":"2026-08-31T08:58:55","date_gmt":"2026-08-31T08:58:55","guid":{"rendered":"https:\/\/rock-crusher-tractor.com\/?p=1110"},"modified":"2026-08-31T08:58:55","modified_gmt":"2026-08-31T08:58:55","slug":"potato-digger-tractor-mounted-single-row-guide","status":"publish","type":"post","link":"https:\/\/rock-crusher-tractor.com\/id\/potato-digger-tractor-mounted-single-row-guide\/","title":{"rendered":"Alat Penggali Kentang yang Dipasang pada Traktor \u2014 Pemandu Baris Tunggal"},"content":{"rendered":"
\n

<\/p>\n

\n
<\/div>\n
\n
Potato Machinery \u2014 Product Guide<\/span>
\nSingle-Row Mounted<\/span><\/div>\n

Alat Penggali Kentang yang Dipasang pada Traktor \u2014 Pemandu Baris Tunggal<\/h1>\n

The right mounted digger matched to the right tractor on the right ground delivers clean, undamaged potatoes at low maintenance cost. This guide covers every variable in that equation.<\/p>\n

\n
\n
40\u2013120 HP<\/div>\n
Tractor range<\/div>\n<\/div>\n
\n
540 RPM<\/div>\n
PTO standard<\/div>\n<\/div>\n
\n
12\u201325 cm<\/div>\n
Digging depth range<\/div>\n<\/div>\n<\/div>\n

Get Specification for Your Farm \u2192<\/a><\/p>\n<\/div>\n<\/div>\n

<\/p>\n

\n

<\/p>\n

The tractor-mounted single-row potato digger is the workhouse of small and medium potato operations worldwide \u2014 from the highland farms of Benguet in the Philippines to the market gardens of southern England and the seed potato fields of western Canada. It is compact enough to work in 3-metre rows, simple enough to maintain without specialist engineers, powerful enough to harvest at 1\u20133 ha per hour, and \u2014 when correctly matched to the tractor pulling it and the soil beneath it \u2014 precise enough to deliver Grade 1 potatoes with minimal bruising and minimal stone contamination.<\/p>\n

This guide covers how the machine works, how to match it to your tractor, what the key components determine about harvest quality, how to set it correctly for your row spacing and planting depth, and how stone management before harvest determines whether the digger delivers its performance potential or spends the season in maintenance downtime. Korea Watanabe’s mesin kentang<\/a> range includes both single-row mounted and trailed configurations; this article covers the mounted single-row digger in full.<\/p>\n

<\/p>\n

How a Single-Row Mounted Potato Digger Works<\/h2>\n

\"Single-row<\/p>\n

The single-row mounted potato digger is a straightforward but precisely engineered machine. It attaches to the tractor’s three-point rear linkage, receives drive from the PTO shaft, and processes the potato row through three sequential stages in a single forward pass. Understanding what each stage does \u2014 and what can go wrong at each \u2014 is the starting point for both correct adjustment and rational maintenance budgeting.<\/p>\n

<\/p>\n

\n
A<\/span><\/p>\n
\n

Stage 1 \u2014 Digging Share: Lifting the Row<\/p>\n

The hardened share blade (boron steel, Brinell 400\u2013450 HB) drives under the potato row at the set depth, lifting a ribbon of soil and tubers onto the elevator. Share width is matched to the planted row width \u2014 typically 300\u2013450 mm for standard varieties. The share’s angle and depth setting determine how cleanly the row is undercut without driving tubers into the moving chain. A correctly set share lifts the entire root zone without disturbing adjacent unplanted soil \u2014 critical for avoiding the secondary bruising that comes from tubers being pushed sideways during lifting.<\/p>\n<\/div>\n<\/div>\n

B<\/span><\/p>\n
\n

Stage 2 \u2014 Elevator Chain: Separating Soil from Tubers<\/p>\n

The vibrating elevator chain \u2014 an open-weave web of cross-rods spaced 28\u201335 mm apart \u2014 carries the lifted soil-potato mass at a controlled upward angle (typically 18\u201322\u00b0). As the chain moves, the soil, clods, and small stones fall through the rod gaps while the larger tubers ride on top to the upper discharge end. The chain’s vibration frequency (determined by an eccentric shaft in the drive system) is critical: too slow and clods don’t break up; too fast and tubers are thrown against the chain rods \u2014 creating the bruising that appears as blackspot at the pack house. Correct chain speed is set by PTO RPM and the chain drive ratio.<\/p>\n<\/div>\n<\/div>\n

C<\/span><\/p>\n
\n

Stage 3 \u2014 Side Riddle and Discharge: Final Separation<\/p>\n

At the top of the elevator, the tuber stream reaches the side riddle or secondary web \u2014 a laterally-mounted separation screen that performs a final shake to remove remaining soil and small stones before the potatoes are deposited in a windrow alongside the machine. The quality of this final separation determines how clean the load is at the collection pass: a poorly adjusted riddle allows small stones and clods into the windrow, which then combine with tubers in the collection bucket and cause further bruising and pack house contamination. Riddle adjustment \u2014 angle, vibration speed, and mesh size \u2014 is the final tuning point that differentiates clean Grade 1 output from a mixed load that loses value at intake.<\/p>\n<\/div>\n<\/div>\n<\/div>\n

<\/p>\n

<\/p>\n

Tractor Matching \u2014 HP, PTO and Three-Point Hitch<\/h2>\n

\"Potato<\/p>\n

The single-row mounted potato digger places moderate but sustained demands on the tractor \u2014 the PTO must maintain consistent speed under varying soil load, and the three-point hitch must carry the digger’s weight while allowing the depth-sensing gauge wheels to track the soil surface accurately. Under-powering the tractor causes PTO speed drops that change elevator chain vibration and reduce soil separation efficiency; over-specifying the tractor relative to the digger wastes resources without improving performance. The following matching table covers the full range from small market-garden tractors to mid-range farm tractors:<\/p>\n

<\/p>\n

\n\n\n\n\n\n\n\n\n
Tractor HP Range<\/th>\nHitch Category<\/th>\nPTO<\/th>\nTypical Application<\/th>\nDakwaan<\/th>\n<\/tr>\n<\/thead>\n
28\u201340 HP<\/td>\nCat 1<\/td>\n540 RPM<\/td>\nMarket garden, SE Asian highland<\/td>\nMarginal<\/span><\/td>\n<\/tr>\n
40\u201360 HP<\/td>\nCat 1 \/ Cat 2<\/td>\n540 RPM<\/td>\nSmall farm, market garden, seed plots<\/td>\nDirekomendasikan<\/span><\/td>\n<\/tr>\n
60\u201380 HP<\/td>\nCat 2<\/td>\n540 RPM<\/td>\nGeneral farm, ware and seed potato<\/td>\nOptimal<\/span><\/td>\n<\/tr>\n
80\u2013120 HP<\/td>\nCat 2 \/ Cat 3<\/td>\n540 \/ 1000 RPM<\/td>\nSame as THOR clearing tractor \u2014 dual purpose<\/td>\nVersatile<\/span><\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

The 60\u201380 HP range represents the optimal match for most single-row mounted digger applications: sufficient power reserve to maintain 540 RPM PTO speed through dense clay soils or when digging depth increases on uneven terrain, and a Category 2 three-point hitch that provides the positional precision needed for accurate depth control through the gauge wheels. Tractors in this range also typically have adequate rear-axle hydraulic lift capacity (800\u20131,500 kg, depending on model) to transport the digger safely on headlands and farm tracks.<\/p>\n

For farms with an 80\u2013120 HP tractor used for stone clearing with the THOR rock crusher in the pre-planting season, the same tractor can transition directly to potato digger duty at harvest with a PTO reduction gearbox if required (for older tractors with 1000 RPM rear PTO). This dual-use approach \u2014 one tractor powering the full pre-planting clearing and the harvest operation \u2014 reduces total equipment investment while maintaining the performance standard at both operational stages.<\/p>\n

<\/p>\n

\n

PTO and Hitch Specification Quick Reference<\/p>\n

\n
\n
Kecepatan PTO<\/div>\n
Standard: 540 RPM. Operate within \u00b15% of rated speed at all times. PTO drops below 510 RPM under heavy load signal inadequate tractor HP \u2014 reduce forward speed or digging depth.<\/div>\n<\/div>\n
\n
PTO Driveshaft<\/div>\n
Telescoping driveshaft with universal joints. Always verify minimum compressed length before operating at minimum hitch height \u2014 shaft collapse under compression damages gearbox input splines.<\/div>\n<\/div>\n
\n
Three-Point Hitch<\/div>\n
Category 1 (lower link pins 22 mm) for tractors up to 60 HP. Category 2 (pins 28 mm) for 60+ HP. Category mismatch prevents correct hitch pin engagement \u2014 always verify before attaching.<\/div>\n<\/div>\n
\n
Lift Capacity<\/div>\n
Minimum rear lift capacity: 600 kg at hitch point for safe road transport of the digger. Verify against your tractor’s published lift chart at the relevant lift height before field transport.<\/div>\n<\/div>\n<\/div>\n<\/div>\n

<\/p>\n

Key Components \u2014 Share, Chain and Separator in Detail<\/h2>\n

\"Potato<\/p>\n

\n

<\/p>\n

\n
\n

\ud83d\udd29 Digging Share<\/p>\n<\/div>\n

\n

The share is the highest-wear component and the primary interface between machine and soil resistance. Boron steel hardened to Brinell 400\u2013450 HB provides the optimum balance between abrasion resistance and machinability for sharpening. Share width options \u2014 typically 300 mm, 380 mm, and 450 mm \u2014 match the planted row width. The share’s attack angle (typically 22\u201328\u00b0 from horizontal) determines how aggressively it undercuts the row: shallower angles for lighter sandy soils, steeper angles for heavy clay.<\/p>\n

\n
Replacement Signal<\/div>\n
When the cutting edge has receded more than 8 mm from the original profile, or when tractor fuel consumption increases by >15% at constant speed and depth \u2014 the share is dulled and must be replaced or resharpened.<\/div>\n<\/div>\n<\/div>\n<\/div>\n

<\/p>\n

\n
\n

\u26d3 Elevator Chain<\/p>\n<\/div>\n

\n

Rod spacing of 28\u201335 mm is the standard range \u2014 narrower for sandy soils where small tubers need support on the chain, wider for heavy clay where large clod throughput is required. The chain’s speed relative to forward travel speed is the key separation efficiency variable: at the standard ratio, soil residence time on the chain is approximately 3\u20135 seconds \u2014 enough for loose sandy soil to fall through but insufficient for large wet clods without the vibrating eccentric action. Chain tension should be checked every 50 hours: a correctly tensioned chain sags 10\u201315 mm at the centre of the upper run when pressed by hand with the machine stopped.<\/p>\n

\n
Maintenance Interval<\/div>\n
Lubricate chain rollers every 10 operating hours with penetrating chain oil. Inspect rod ends for fatigue cracking every 50 hours. Replace chain when elongation exceeds 3% of original pitch-to-pitch measurement on a 12-link sample.<\/div>\n<\/div>\n<\/div>\n<\/div>\n

<\/p>\n

\n
\n

\u2699 Side Riddle \/ Star Wheel<\/p>\n<\/div>\n

\n

The secondary separation stage \u2014 either a laterally oscillating riddle frame or rubber-covered star wheels \u2014 performs the final soil and stone removal before the potatoes are deposited in the windrow. Riddle mesh size and oscillation angle are the two primary adjustments: larger mesh and steeper angle for sandy free-running soil; finer mesh and shallower angle for sticky clay where large clods must be retained long enough to be broken down. Star wheel gap spacing is set by the spacer collar system \u2014 typically adjusted in 5 mm increments to match the target tuber diameter and exclude stone sizes likely to be present.<\/p>\n

\n
Quality Indicator<\/div>\n
Check windrow output at start of each field: no more than 3 stones >30 mm per metre of windrow indicates acceptable separation. More than this \u2014 adjust riddle angle steeper or increase star wheel gap, or assess whether stone clearing is required before continuing.<\/div>\n<\/div>\n<\/div>\n<\/div>\n

<\/p>\n

\n
\n

\ud83d\udee1 Stone Protection System<\/p>\n<\/div>\n

\n

The shear bolt (or slip clutch on higher-specification models) is the last line of protection against catastrophic stone-induced driveline damage. The shear bolt is designed to fail at a predetermined torque threshold \u2014 absorbing the energy of a stone impact and protecting the gearbox and PTO driveshaft at the cost of a single bolt. Shear bolt replacement takes 5\u201310 minutes in the field but requires the correct grade and diameter \u2014 substituting a higher-grade bolt as a “temporary” fix risks transmitting the next stone impact directly to the gearbox. Always carry a stock of OEM-specified shear bolts for the complete harvest season.<\/p>\n

\n
Critical Warning<\/div>\n
Never substitute a higher-grade or larger-diameter bolt than OEM specification. The shear bolt is a designed failure point \u2014 defeating it risks gearbox or shaft damage costing many times the price of a correct replacement bolt.<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n

<\/p>\n

<\/p>\n

Depth Control, Row Spacing and Field Adjustment<\/h2>\n

\"Potato<\/p>\n

Correct adjustment of the mounted potato digger takes no more than 30 minutes at the start of the harvest season \u2014 and pays back in reduced bruising, lower fuel consumption, and fewer missed tubers throughout the entire campaign. The three critical adjustments are digging depth, share-to-row alignment, and working speed. Each interacts with the others: a change in depth changes the soil volume on the elevator (which changes chain load), and a change in speed changes the ratio of chain speed to forward speed (which changes separation efficiency).<\/p>\n

<\/p>\n

\n\n\n\n\n\n\n\n\n
Adjustment Parameter<\/th>\nToo Shallow \/ Slow<\/th>\nCorrect Range<\/th>\nToo Deep \/ Fast<\/th>\n<\/tr>\n<\/thead>\n
Digging depth<\/td>\nMissed tubers; root tear damage<\/td>\nPlanting depth + 3\u20135 cm
\n(typically 15\u201322 cm)<\/td>\n		Excess soil; chain overload; fuel waste<\/td>\n<\/tr>\n
Share-to-row offset<\/td>\nCuts into adjacent row ridge<\/td>\nShare centred \u00b115 mm on planted row<\/td>\nMisses edge tubers; bruising on share sides<\/td>\n<\/tr>\n
Kecepatan maju<\/td>\nSoil buildup on chain; blockage risk<\/td>\n1.5\u20133.0 km\/h for most conditions<\/td>\nChain transit too fast; poor separation<\/td>\n<\/tr>\n
Row spacing match<\/td>\nShare too narrow; edge losses<\/td>\nShare width = 75\u201385% of row pitch<\/td>\nShare too wide; adjacent row disturbance<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

The practical starting point for depth setting: establish the planting depth by pushing a rigid ruler down alongside a visible haulm at the start of the field \u2014 measure the tuber cluster’s lowest point. Set the digging share to this depth plus 4 cm. Then run a 20-metre test pass on the field headland, stop the tractor, and walk the windrow. If undamaged tubers are present in the undug soil \u2014 deepen by 2 cm. If the chain is carrying excessive soil with reduced separation \u2014 reduce forward speed by 0.3 km\/h before reducing depth. These two adjustments cover 90% of in-field tuning requirements across soil types and conditions.<\/p>\n

<\/p>\n

Stone Protection \u2014 Before the Digger, Not After<\/h2>\n

The single-row mounted digger’s compactness and simplicity make it highly effective on stone-free or low-stone-density fields. On medium- or high-stone-density fields, those same qualities \u2014 a relatively lightweight chassis, standard shear bolt protection, and smaller-diameter drive components compared to larger trailed machines \u2014 make it more susceptible to stone-induced damage than a heavy trailed digger with reinforced driveline. For this reason, stone management before the digger season is not optional on any field where the spring stone assessment returns more than 3 stones per m\u00b2.<\/p>\n

Korea Watanabe’s stone management equipment works in the field season before the potato digger, not alongside it. The sequence that protects the mounted digger is straightforward and is covered in detail in the penghancur batu<\/a> Dan pemetik batu<\/a> specifications:<\/p>\n

\n
\u2460<\/span><\/p>\n
\n

THOR Rock Crusher<\/a> \u2014 Autumn or Spring Before Planting<\/p>\n

Fractures sub-surface stone at the digger’s planned operating depth plus 3\u20135 cm. For a mounted digger operating at 18\u201322 cm, set THOR at 20\u201326 cm \u2014 ensuring the full operating zone is stone-free. Complete THOR before planting, not before harvest (cleared soil needs settlement for ridge formation). A single THOR pass protects both the planting equipment and the subsequent harvest digger from stone contact.<\/p>\n<\/div>\n<\/div>\n

\u2461<\/span><\/p>\n
\n

Pemetik Batu CT-2100<\/a> \u2014 Permanent Stone Removal<\/p>\n

After THOR fragmentation, the CT-2100 permanently removes the crushed stone fragments. This is the step that makes the field genuinely lower-stone rather than just redistributing stone to a smaller fragment size. On a field cleared with THOR + CT-2100, the shear bolt and slip clutch protection systems function as designed safety margins \u2014 not as permanent first lines of defence that are constantly activated.<\/p>\n<\/div>\n<\/div>\n

\u2462<\/span><\/p>\n
\n

Penggaruk Batu BlackBird<\/a> \u2014 Annual Pre-Harvest Surface Pass<\/p>\n

Even after THOR + CT-2100 deep clearing, frost heave and cultivation resurface small stones each season. A BlackBird pass 4\u20136 weeks before harvest removes these and resets the field to its cleared condition. At 9.5 m working width and 10\u201312 km\/h operating speed, a BlackBird pass covers 10 ha in under 3 hours \u2014 the lowest-cost annual maintenance investment in the potato digger protection system.<\/p>\n<\/div>\n<\/div>\n<\/div>\n

<\/p>\n

<\/p>\n

Pertanyaan yang Sering Diajukan<\/h2>\n
\n
\nQ<\/span>
\nCan I use a single-row mounted digger with a front-wheel-assist (FWA) tractor, or does it require four-wheel drive?<\/summary>\n
\n

The single-row mounted digger operates with either two-wheel drive (2WD), front-wheel assist (FWA), or full four-wheel drive (4WD) tractors. The PTO connection and three-point hitch are identical across all drive configurations. Traction requirement, however, favours FWA or 4WD on clay soils, wet conditions, or slopes above 8\u00b0: the additional drag of the digging share at full depth creates a de-weighting effect on the tractor’s front axle that reduces steering control on 2WD machines in soft soil conditions. On dry sandy loam \u2014 which is common in market garden contexts \u2014 2WD tractors of 50+ HP operate without traction issues. Verify your specific tractor model’s rear PTO shaft type (splined 6-tooth 540 RPM standard shaft) against the digger’s input coupling specification before attaching for the first time.<\/p>\n<\/div>\n<\/details>\n

\nQ<\/span>
\nWhat is the correct approach to adjusting the digger for seed potatoes versus ware potatoes, given that seed potatoes are planted at different densities and depths?<\/summary>\n
\n

Seed potato production places stricter requirements on harvest damage tolerance because even minor skin scuffing or internal bruising on the seed creates infection entry points that reduce emergence rates and increase stolon blight incidence in the following crop. The digger adjustments that specifically favour seed potato harvest: (1) Reduce forward speed to the lower end of the operating range (1.5\u20131.8 km\/h) \u2014 slower speed increases chain residence time and separation effectiveness, reducing the number of small stones remaining in the tuber stream. (2) Set chain tension towards the tighter end of the specified range \u2014 a tighter chain vibrates with higher frequency at the same PTO RPM, improving clay clod breakdown without requiring increased speed. (3) Set riddle mesh one size finer than for ware potato on the same soil \u2014 seed potato buyers have stricter stone and clod contamination tolerances. (4) Increase the share’s angle slightly (by one notch on the adjustable mounting if fitted) to ensure a cleaner undercut that avoids skin damage on the tubers being lifted onto the chain’s leading rods.<\/p>\n<\/div>\n<\/details>\n

\nQ<\/span>
\nHow does soil type affect the choice between a star wheel separator and a riddle frame separator on a single-row digger?<\/summary>\n
\n

The choice between star wheel and riddle frame secondary separation depends on the soil’s clod-forming tendency and stone size distribution. Star wheels excel in sandy and free-running soils where clod formation is minimal \u2014 they provide gentle, consistent stone-potato separation without the lateral shock of a full riddle oscillation. Star wheels are also better suited to small highland or market garden tractors where the additional vibration of a full riddle frame can cause linkage fatigue on lighter three-point hitches. Riddle frames \u2014 with their larger oscillating surface and adjustable mesh size \u2014 are better suited to clay and heavy loam soils where large clods must be progressively broken down across the separation surface. They are more adjustable to varying soil conditions within a single field (by changing oscillation angle and speed during the pass) but require a more structurally rigid three-point hitch to absorb the cyclic forces generated. In practice: for small market garden tractors below 50 HP on light soils, specify star wheel configuration. For 60+ HP tractors on clay soils with large clod potential, specify riddle frame with adjustable oscillation speed.<\/p>\n<\/div>\n<\/details>\n

\nQ<\/span>
\nWhen does it make sense to upgrade from a single-row mounted digger to a trailed two-row digger, and what are the operational differences?<\/summary>\n
\n

The decision to step up from single-row mounted to trailed two-row should be driven by harvested area per season rather than farm size alone. A single-row mounted digger at 1.5\u20132.5 km\/h harvests approximately 0.5\u20130.8 ha per hour including headland turns \u2014 adequate for farms up to 8\u201312 ha of potatoes per season with a single machine. Beyond 12 ha\/season, the harvest window constraint (potatoes should be harvested within a specific skin-set period after haulm destruction, typically 14\u201321 days) often makes a second pass more efficient with a wider machine. Operationally: the mounted digger requires a tractor to drive in the planted row, whereas the trailed digger typically offset-mounts to allow the tractor to drive in the inter-row. The trailed digger also has significantly higher static weight that improves operating stability in uneven terrain but requires a tractor with adequate rear lift capacity (typically 2,000+ kg at hitch point) for safe transport. For most small farms below 10 ha potato area, the single-row mounted digger remains the more cost-effective and logistically simpler solution.<\/p>\n<\/div>\n<\/details>\n

\nQ<\/span>
\nWhat end-of-season maintenance does the single-row mounted digger require before winter storage?<\/summary>\n
\n

End-of-season maintenance for the single-row mounted digger should complete within a half-day for one operator and covers: (1) Full wash-down with a low-pressure water jet \u2014 removal of soil and crop residue before it sets and causes corrosion. Do not use high-pressure washers on chain rollers or PTO driveshaft guards. (2) Chain inspection: remove the chain from the machine, check each rod for fatigue cracks at the weld points, measure elongation on a 12-link sample, replace if elongation exceeds 3% of original pitch. Soak the chain overnight in a penetrating chain bath before reinstalling or storing separately. (3) Share inspection: check for cracks in the hardened zone (not surface chips \u2014 through-cracks). Measure remaining material above the original cutting-edge profile. Order replacements for shares within 3\u20135 mm of minimum thickness before the following season. (4) Gearbox: drain and refill with fresh oil to the specified grade and level \u2014 gear oil that has operated through a full harvest season will show darkening from metal wear particles that become abrasive if left over winter. (5) All grease nipples: apply fresh grease to all accessible nipples \u2014 12\u201318 points on a typical machine. (6) Paint touch-up on bare metal from harvest impacts, then light coat of water-displacing spray on all unpainted metal surfaces before dry indoor storage.<\/p>\n<\/div>\n<\/details>\n<\/div>\n

<\/p>\n

<\/p>\n

\n
\n
\n

Korea Watanabe Potato Machinery<\/p>\n

Single-Row Mounted Digger \u2014 Specified for Your Tractor, Soil and Crop<\/p>\n

Your tractor HP + hitch category + soil type + row spacing + stone assessment \u2192 Korea Watanabe specifies the correct share width, chain configuration, and separator type, and provides the THOR + CT-2100 stone preparation protocol that keeps your penggali kentang<\/a> operating at design specification throughout the season.<\/p>\n

Korea Watanabe Rock Crusher Tractor Co., Ltd. \u00b7 Ansan-si, Gyeonggi-do<\/p>\n<\/div>\n

Get Specification for Your Farm \u2192<\/a>
\nBrowse Full Potato Machinery Range<\/a><\/div>\n<\/div>\n<\/div>\n<\/div>\n

<\/p>\n<\/div>\n

<\/p>\n

Editor: Cxm<\/p>","protected":false},"excerpt":{"rendered":"

Potato Machinery \u2014 Product Guide Single-Row Mounted Potato Digger Tractor Mounted \u2014 Single Row Guide The right mounted digger matched to the right tractor on the right ground delivers clean, undamaged potatoes at low maintenance cost. This guide covers every variable in that equation. 40\u2013120 HP Tractor range 540 RPM PTO standard 12\u201325 cm Digging […]<\/p>","protected":false},"author":1,"featured_media":0,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"_et_pb_use_builder":"","_et_pb_old_content":"","_et_gb_content_width":"","footnotes":""},"categories":[31],"tags":[],"class_list":["post-1110","post","type-post","status-publish","format-standard","hentry","category-application-and-technical-guid"],"_links":{"self":[{"href":"https:\/\/rock-crusher-tractor.com\/id\/wp-json\/wp\/v2\/posts\/1110","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/rock-crusher-tractor.com\/id\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/rock-crusher-tractor.com\/id\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/rock-crusher-tractor.com\/id\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/rock-crusher-tractor.com\/id\/wp-json\/wp\/v2\/comments?post=1110"}],"version-history":[{"count":1,"href":"https:\/\/rock-crusher-tractor.com\/id\/wp-json\/wp\/v2\/posts\/1110\/revisions"}],"predecessor-version":[{"id":1111,"href":"https:\/\/rock-crusher-tractor.com\/id\/wp-json\/wp\/v2\/posts\/1110\/revisions\/1111"}],"wp:attachment":[{"href":"https:\/\/rock-crusher-tractor.com\/id\/wp-json\/wp\/v2\/media?parent=1110"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/rock-crusher-tractor.com\/id\/wp-json\/wp\/v2\/categories?post=1110"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/rock-crusher-tractor.com\/id\/wp-json\/wp\/v2\/tags?post=1110"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}